Solution
Regrinding and reusing bending dies
Does the mold you are using exhibit any of the following conditions: deformation of the cutting edge, chipping or pitting at the cutting edge, or wear on the V-groove, resulting in scratches on the machined parts and reduced dimensional accuracy?
Wear on the shoulder of the lower die V-groove
Upper die cutting edge deformation
The upper die cutting edge is dented, and the tip radius has worn away.
Lower die V-groove wear
Advantages of regrinding and refurbishment:
● Reduced product scratches and dents caused by wear
● Enhance product accuracy and stability
● Reduce the product scrap rate
● Reduce production costs
Special Bending Die
Youli Glue R Bending
Total Type R Bend
Simultaneous U-bending
Box-type U-bend
Hat-type V-bend
Step bend
Special 1V lower mold
Cam-type U-bending
Hinge bending
Hat-type U-bend
Vertical edge-press bending
Corrugated curved bending
Ultra-short-side bending combination die
Multi-segment offset special bending step
W-shaped, one-piece, special bending
Hinge-forming combined bending
Special deep U-shaped bend
Scan to browse on your phone
Contact Us
Guangji (Taicang) Precision Mould Co., Ltd.
Phone:0512-53226698
Fax: 0512-53226678
Email:kyokkoss@kyokkoss.com.cn
Website:www.kyokkoss.com.cn
Address: No. 3 Aike Road, Industrial Development Zone, Shaxi Town, Taicang City